Film Faced Shuttering Plywood
Magnus film face shuttering plywood is manufactured with high density timber in ultra modern hot presses. Since it is manufactured with CPGL technology, thus it has extra strength than ordinary film face ply. For structurally strong and better bonding it is treated differently while manufacturing.
Magnus film face shuttering ply is widely known for the maximum repetitions it gives. Users find it a very useful & economical product worth their investment.
Technical Specifications: IS:4990:2001
Density : 0.65 to 1.20 gm/cm3
Thicknesses : 9, 12, 15, 18, 25, 30 mm
Sizes : 1840 x 1220, 2440 x 1220, 2745 x 1525, 3050 x 1525, 3200 x 1675 mm
Weight : 23, 30, 34, 36, 38, 42 Kg in 12mm 38, 45, 52, 54, 56, 60 Kg in 19mm
HIGHLIGHTS:
Special features of Magnus film face shuttering plywood are:
- Magnus film face shuttering plywood is most effective in RCC constructions.
- It has a smooth mirror like superior finishing on both surfaces.
- It saves up to 45% of cost compared to other similar products due to more repetition during shuttering work.
- Its cross laminated structure between face veneer, core veneer and the film again enhances the strength of ply.
- After using it as shuttering plywood for many times, it can be reused for panelling, roofing, flooring, partitions etc.
Application:
It is being used widely in the construction of bridges, flyovers, metro projects, ship building, water tanks, cooling towers, all high rise buildings etc., which need maximum strength and security.
Do’s:
1. Cleaning and oiling the surface increasing the life of plywood.
2. Use screws to fix shuttering plywood.
3. Store it properly stacked under a shed.
4. Care should be taken during transport to avoid scratches.
5. Should be recoated with mould oil before the next use.
6. The edges of a board in pack shall be in a straight vertical line.
Dont’s:
1. Side screwing & nailing strictly prohibited.
2. Don’t use the material without suitable mould oil.
3. Don’t allow the material to fell down from top / certain height of the building.
4. The plywood shall not be dragged over one another as this would scratch the surface.
5. Don’t allow the material to use without sealants at the cut edges.
6. Don’t allow the material to stack without proper drying.