Call us on – 1800 2121 920  Mon – Sat : 10 AM to 6 PM

info@magnusply.com

Facebook Youtube Linkedin Instagram

Truck Flooring

Truck owners, are you continuously searching for an ultra-strong, metal-reinforced transportation plywood that has been built to stay rigid under extreme loads and never bends under pressure? If so, welcome Magnus Truck Flooring, a specially designed engineered panel that is curated for high-load durability with built-in metal reinforcement, making this truck a top-tier solution for commercial vehicle applications.

Made specifically using sheets of metal wires and later laminated between layers of high-density ply, this truck flooring is bonded with PF resin under hydraulic compression that offers longevity and strength both for mobile and industrial use.

Enquire Now

HIGHLIGHTS

  • Reinforced with Metal: Built-in metal wires to unmatched rigidity
  • High-Density Build: 0.95 to 1.25 gm/cm³
  • Zero Bend Performance: Densified structure resists flex under weight
  • Heavy-Load Ready: Designed for high-stress flooring in transportation
  • Thickness Options: 12 mm | 16 mm | 19 mm | 25 mm
  • Size Options: 2440 mm to 3350 mm (Length) | 600 mm to 1820 mm (Width)
  • Compliance: AS:109:70:2006

Applications: Truck & Commercial Vehicle Flooring | Industrial Decks | Anti-Skid Floor Panels | Automobile Sector Paneling | Ceiling | Backrest Seats | Heavy-Use Platforms

Do’s

  • Choose to use truck flooring: Choose to install this transportation plywood in truck beds or commercial vehicles, this will enhance strength and surface grip.
  • Sealed the edges properly: Consider pre-checking and sealing the exposed edges of the truck flooring, this will prevent long-term water damage and delamination.
  • Opt to lay down the ply on a level surface: Choose to lay the truck flooring on even places, this will offer the best performance and durability.
  • Before installation, meet the load requirements: Before installation, check the truck flooring and ensure it has the proper thickness, this will fit the weight-bearing needs, making the process of installation easy. 
  • Favour to use truck ply in rough terrain: Choose this truck flooring plywood in areas where the frequency of motion, weight, and moisture is high.

Don’ts

  • Defective tools for cutting ply: Using defective tools for cutting this truck flooring plywood can lead to damage to the flooring and thereby reduce its longevity. 
  • Bonding can weaken on placing in water: If you leave the truck flooring near water areas for longer hours, the surface can be damaged, weakening the resin bonding and panel strength.
  • Don’t lay down on unsupported surfaces: Do not choose to stack this truck flooring on sloped or unsupported surfaces, this can lead to the warping of the plywood in a shorter duration. 
  • Don’t use thinner sheets: Do not use low-thickness panels in the high-impact areas, this can compromise the flooring integrity, reducing its strength and performance. 
  • Don’t place in sharp places: Do not drag or slide the panel roughly across metallic or jagged surfaces, this can damage the outer layer.